When choosing the length of the snowboard veneer, you have to consider the problem. Generally speaking, the longer the length of the snowboard veneer, the longer the effective edge of the board, the faster the sliding speed, and the stronger the stability. . But at the same time, the long effective edge will also make the turning radius of the snowboard veneer larger, and the turning will become less flexible, because the side cutting radius becomes longer. The shorter the relative board, the more flexible it will be, but the speed and stability of the sliding will also decrease.

On the snowboard veneer, the manufacturer usually has a length mark. When choosing the length of the snowboard, the most commonly used method is to reduce the height of the snowboard by 20 cm. When the board is erected, the height of the board is almost as high as the chin. But this method is not suitable for everyone. For example, everyone's weight and body will be different. The higher the height and the heavier weight, the length of the snowboard should also be appropriately increased.

There are also different versions. For example, when buying a wild snowboard, the length is generally 1-2 cm longer than the all-round board, and it can be shortened appropriately when you want a flat flower or a park. For some special versions or long and short boards, you can choose the size of the snowboard veneer according to the manufacturer's recommendations.